Furnace Repair
Furnace Repair
Igniters, flame sensors, limits and heat exchangers — diagnosed with safety checked first.
Furnaces are less common in Florida than heat pumps and electric strips, but they exist — more so in Central Florida than on the coast — and when they fail they fail along a well-worn path. Hot-surface igniters crack. Flame sensors film over and stop proving flame, so the burner lights and immediately shuts down. Limit switches trip because airflow has fallen. Pressure switches and inducer motors fail and lock out the sequence before it starts.
Furnace work carries a safety dimension that electric heat does not, so diagnosis starts there: heat exchanger condition, combustion, venting and safety controls. A furnace that heats but has a compromised heat exchanger is not a repair job, and we will say so plainly rather than patch around it. Where the fault is a genuine component failure, most are same-visit repairs.
Common furnace faults
- The burner lights and then shuts down after a few seconds
- Clicking with no ignition at all
- Short cycling on the high-limit switch
- A blower that runs continuously without heat
- Soot, scorching or an unusual smell around the unit
What the repair includes
- Safety-first inspection: heat exchanger, combustion and venting
- Hot-surface igniter and flame sensor service or replacement
- Pressure switch, inducer motor and limit switch testing
- Control board and sequence-of-operation diagnosis
- Airflow and temperature rise verified against the nameplate
South Florida
Furnace Repair across Miami-Dade, Broward, Palm Beach
Salt air, year-round cooling load, and high-rise condo systems with limited access.
South Florida coverageCentral Florida
Furnace Repair across Polk, Orange, Osceola
Genuine winter nights, heavy inland summer humidity, and heating that actually gets used.
Central Florida coverageFurnace Repair — common questions
What if the heat exchanger is cracked?
We will show you what we found and recommend replacement rather than a workaround. A compromised heat exchanger is a safety issue, not a maintenance item.
Related services
Furnace Installation
Correctly sized, correctly vented, and commissioned against measured temperature rise.
Details
Heating System Repair
Heat strips, heat pumps and furnaces — diagnosed on the two or three cold nights a year when Florida actually needs them.
DetailsHeating System Maintenance
The pre-season check that finds the failure in November instead of on the coldest night in January.
Details
HVAC Maintenance
Both halves of the system, serviced on a schedule, with readings recorded year over year.
DetailsNeed furnace repair today?
Open 24 hours, 7 days a week. Someone answers the phone at 3 AM. Not a machine.